| Author | Message | ||
     Oldironsides |
Does anyone know how big of a job replaceing the pushrod tubes seals are. Or any other info I might need for this job. thanks. | ||
| Lovedabueller |
manual, beer, time, and patience | ||
| Hippyjoe |
You'll need to pull the rockers to get the pushrods out. If you haven't replaced your opd yet it would be a good time to go after that too imo. | ||
| Texastechx1 |
opd? | ||
| Jramsey |
I do believe Hippyjoe means Oil Pump Drive gear. | ||
| Texastechx1 |
oh i'm outta the loop on that particular abbreviation. | ||
| Texastechx1 |
wait... wouldn't it be OPDG? | ||
| Hippyjoe |
Hey now you're right, sometimes i do that to see if anybody reads my posts, lol | ||
| Kyrocket |
Oldironsides you may want to consider getting the one piece push rod tube bases. They're fairly cheap, around $45 for a pair, and can be sourced from several places. American Sport Bike and NRHS come to mind right off the bat. They replace the two smaller pieces at the base of the push rods, hence the name I guess. It's a fairly cheap upgrade and since you're already there and all. | ||
| Oldironsides |
kyrocket, yeah I saw those last night on American Sport Bike. I likey. I will look into the pump drive gear idea. Im a big fan of PM. Thanks guys. |
