| Author | Message | ||
     Biker0099 |
Hello, Anyone know how to remove the ignition from the front bezel on an M2? i dont see a section in the manual for it, i see notches but the bugger wont come off. | ||
| Fuzzy |
sounds like someone used more than blue loctite  bezel nut should just screw off. | ||
| Littlebuggles |
Yup, regular counter clock wise and all that, I used a special tool (hammer assisted screwdriver) to take mine off previously. Haven't been able to tighten it up as much as it was first on, it only shook loose once in six years though. Could try a bicycle bottom bracket tool if it won't come loose with regular tools, I imagine snap ring pliers would be hard to use in this part. |
