| Author | Message | ||
     Bigolebuellfan |
Okay-so forgive me if this appears somewhere else-I can't find it. I found a Scorpion exhaust for a 99 M2, w/2.5 inlet. Will this fit an 02? The 02 is (I believe) a 2.5 inlet also, but are there any other differences? Mounting brackets, etc.? Anybody have any experience w/the Scorpion exhaust? Thanks. | ||
| Littlebuggles |
Didn't know Scorpion made a pipe for the tubers. Short answer is, er, probably. For your shopping data all 99 and up tube framed Buells ran a 2 1/2" pipe. The 98 S1W (White Lightning) also ran the 2 1/2" exhaust. So any slip on spec'd for any of those bikes should fit. If, however, you are buying a full system - the X1's and S3's have a O2 sensor in line, so to run a pipe spec'd for them you'd just have to plug the sensor hole. -Mike | ||
| Guell |
Honestly, if thats the pipe im thinking of, its on ebay right? Then the brackets and other connecting pipes look like something off of a rice burner. that does not look like a buell pipe. I very well could be wrong | ||
| Phelan |
Plus, the one I found on eBay mentioned a 2" inlet, not 2.5". | ||
| Brinnutz |
Yes, it will. As long as it's a 2.5" inlet, it will be fine. I don't have one, but I see them ebay all the time. (Message edited by brinnutz on January 31, 2009) | ||
| Bigolebuellfan |
Thanks, all. Yes-it's on ebay. They have it listed as fitting 98-99 w/2.5" inlet. I may end up w/it in the long run, but am working to scrape $ for a new seat... |
