Author |
Message |
Benjamin314
| Posted on Monday, November 24, 2008 - 08:42 pm: |
|
Will a brake line for a 98 m2.Work on my 99 m2? |
Cyclonemduece
| Posted on Monday, November 24, 2008 - 08:54 pm: |
|
yes |
Benjamin314
| Posted on Monday, November 24, 2008 - 09:17 pm: |
|
So will this line work on my m2.This is the part #.Goodrich part # BU1808-2RCH
|
Mick
| Posted on Monday, November 24, 2008 - 10:01 pm: |
|
That looks like its for a twin disk setup |
Brinnutz
| Posted on Monday, November 24, 2008 - 10:49 pm: |
|
That's the rear brake line from Goodrich. |
Hippyjoe
| Posted on Thursday, December 11, 2008 - 10:10 pm: |
|
It looks like the right fittings... as I recall on my 00 the left side line was longer, whereas they both look the same on your line. You should measure the distance from the switch to either side on your bike before pulling off the line. |
Jayvee
| Posted on Sunday, December 14, 2008 - 09:32 pm: |
|
I got mine from American Sport Bike, I will try to check the package for the part number. I looks about right, but I recall the distance from the switch to the pedal being shorter than the switch to the caliper, just like Hippyjoe said. Did you check the part against the Goodrich or other website or ?? |
|