G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Chasespeed Posted on Tuesday, September 30, 2008 - 03:15 pm:        Well, tried to get a damn flasher relay... finally put blinkers back on after... well, more than a few years, and the relay is toast(no big deal)... Called the dealer, and its superceded a bunch of times, and it will take them a damn week to get it there(I will be on the road home in a week). Anyway, I remember there was a thread a while back about a different relay working.. Oh, and if I have a bulb, and a led , how much resistance do I need to add? Chase   Tom_b Posted on Tuesday, September 30, 2008 - 04:08 pm:        call Al lighton. he got me one in 3 days   Brinnutz Posted on Tuesday, September 30, 2008 - 04:32 pm:        Just get the LED Flasher from Al. I have bulb front and integrated LED rear and all flash normally.   Court Posted on Tuesday, September 30, 2008 - 06:39 pm:        American Sport Bike   Chasespeed Posted on Tuesday, September 30, 2008 - 07:28 pm:        Already ordered the part... Thanks, Chase   Dirt Posted on Tuesday, September 30, 2008 - 07:47 pm:        When the flasher on my Uly died, I replaced it with an Trico EP-35 relay from Autozone. Found the info about the substitution on a Ducati board. Works great, been on the bike for over a year and a half without problems. The only difference is there is no slot for the metal mounting flange. I just tie-wrapped it in place. American Sport Bike is a good choice as well.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: