| Author | Message | ||
     Brinnutz |
When did this come about (for tubers that is, I just started seeing them on them)? Where do I get them? Finally, how do I install them? (Message edited by brinnutz on September 24, 2008) | ||
| Firebolt020283 |
on pre 99's or post 99's? | ||
| Brinnutz |
Tubers in general. Spools are what the rear stand goes on, on most jappers and race bikes. | ||
| Firebolt020283 |
yea i know what they are and i have seen them on pre 99 swing arms but i have never seen them on post 99 swing arms. | ||
| Brinnutz |
Never saw them on either myself. But, recently I have seen people with the newer swingarm have them installed. | ||
| Chasespeed |
You could weld something on the bottom of the swing arm to bolt spools on. Chase | ||
| Jstfrfun |
Very stout tabs, tig welded cleanly then tapped to metric thread size...yea do-able! | ||
| Crazyhorse |
 | ||
| Crazyhorse |
looks like a drill and tap to me | ||
| Brinnutz |
Thank you! | ||
| Jstfrfun |
How thick is the meat there? | ||
| Kyrocket |
And where'd you get that sprocket? | ||
| Ratbuell |
Looks like a plain-ol HD sprocket, powdercoated black. | ||
| Clarry |
Pit Bull has weld-on spool brackets, fairly cheap. http://www.pit-bull.com/Merchant2/merchant.mvc?Scr een=CTGY&Store_Code=PBMSA&Category_Code=spool_kits $16.95 for the mounts, and $16.95 for the 8mm spools. | ||
| Rick_a |
I've got some bolted to my steel arm. All it took was a couple little holes. |
