Author |
Message |
Jc000
| Posted on Wednesday, September 17, 2008 - 09:36 am: |
|
Hi, my enrichener knob isn't working--it acts like it's fully out even when pushed in, happened on my commute in today. I don't have access top my parts book, anyone have the part number or numbers handy so I can see about replacing it? |
Buell_bert
| Posted on Wednesday, September 17, 2008 - 10:26 pm: |
|
This should be for a 2000-2001 M2 and M2L. (Cable, carb enrichener) 29238-92A |
Jc000
| Posted on Thursday, September 18, 2008 - 12:15 pm: |
|
Thanks! Strangely, there is no info in the service manual for replacing it, only for making adjustments. I'm gonna take the tank off and see how hard it looks. |
Buell_bert
| Posted on Thursday, September 18, 2008 - 10:03 pm: |
|
I would check it out maybe something came loose. (before you buy one) |
Dwardo
| Posted on Friday, September 19, 2008 - 04:29 pm: |
|
It's easy but I think I had the carb off anyway when I replaced mine. |
Jc000
| Posted on Tuesday, September 23, 2008 - 05:02 pm: |
|
How hard is it to remove the carb? I have the manual, but I've never done it before. |
Reepicheep
| Posted on Tuesday, September 23, 2008 - 07:15 pm: |
|
Easy, as I recall, though there was a nut or something in there that was awkward to get a wrench on. But that was a LONG time ago, so take my opinion with a grain of salt. |
|