| Author | Message | ||
     Moosestang |
 It's supposed to be a 2002 m2, but that's not a stock seat. Thanks. | ||
| Eboos |
I think that is an S1 seat. I have a 2000 M2 with an Airtech tail and a S1 seat and tank. (Message edited by eboos on July 05, 2008) | ||
| Beachbuell |
Looks like a stock S1 set up. | ||
| 99cyclone |
Kind of hard to tell from this angle, but that looks like an S1W seat...slightly more comfortable than a standard S1 seat. | ||
| 80rs427 |
Isn't that one of the aftermarket tail sections that is similar to an S1, but made to fit an M2 frame? | ||
| Mick |
Looks like an RRC tail unit http://www.r-r-customizing.de/shop_b_eng/index.htm l | ||
| Littlebuggles |
Well that really looks like the Buell euro S1 seat, the tail looks very similar to the carbon M2 tail offered by the site Mick posted (but not as good). I think maybe it's some sort of homegrown tail section, looks like a cut and reshaped tail, maybe just a home fiberglass project on the old skinny m2 tail or something. | ||
| Fullauto |
Later swingarm too. Or is it? Did 2002 M2s have that one? (Message edited by Fullauto on July 06, 2008) | ||
| Ratbuell |
02 M2 had the cast swingarm stock. From the angle, I'm pretty sure it is the Euro S1 seat (got the same seat on my S1W). |
