G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Dreadnaught1 Posted on Friday, April 25, 2008 - 10:43 pm:        Does anyone have spools on their rear for rolling stands. If so where did you get them, what size. 8mm, 10mm??   Firstbuell Posted on Friday, May 02, 2008 - 06:51 pm:        8mm had a qualified frame guy drill & tap along swingarm's lower edge for spools - sweet !!   Eboos Posted on Sunday, October 19, 2008 - 01:03 pm:        I did mine for 6mm since I just happened to have that tap. It was quite easy. Just make sure you drill straight. Yamaha spools are 6mm.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: