| Author | Message | ||
     Limitedx1 |
can anybody give me the correct thread size and bolt length for the front mount isolator head bolts for thunderstorm heads. i already ordered a kit from American Sport Bike but they are on back order and fastenal can order me the bolts, just need the correct size. I read it in another thread but i want the real answer. I know i need the f911 bolts and from reading the thread size looks to be 3/8-16 and around 3" long. but my bolts i took out look alot longer than that. | ||
| Limitedx1 |
anyone have a clue? i found a few website where i can order f911 bolts direct, just need the proper size | ||
| Doncasto |
I just ordered some from my local dealer. They are "backordered" but "active, available". The size . . .7/16"X14 - 2 3/4 inch. The f911s are supposed to be grade 8. Keep us appraised . . .if the HD/Buell source has dried up, and Al has run out . . .I may be looking for alternatives in about another week. (Message edited by doncasto on March 03, 2008) | ||
| Limitedx1 |
ok somebody is fibbing or somethin is wrong. buell dealership sayd my font motor mount x1 bolt is 3/8 x 16 by 2 1/4 long. the bolts i pulled out are 2 3/4 long......? im ready to throw some random length grade 9 bolt back in it and ride it! al at asb has not been able to tell when the kits are coming in from buell, so who knows how long this is gonna take and im gettin itchy to ride. | ||
| Limitedx1 |
ok may bad, i knew that guy was full of sh@@@T! The part number for the x1 front motor mount bolt is AA0722.1CBZ and that is a 7/16 x 14 by 2 3/4 long bolt. i ordered the last two he had in middle pennsylvania and it cost 22 buck to the house for two bolts, lol. |
