| Author | Message | ||
     Cyclonemduece |
i am going to put on some XB-s lights on my buell i will figure out the mount on my own but how do i convert my wires to accept the new lights, can i buy a pig tail from the dealer that will have the proper bulb socket, i know that spiderman and joesbuell have both done this,maybe they will chime in. blake (Message edited by cyclonemduece on January 23, 2008) | ||
| Blackm2 |
They should hook right up Blake. I have them on my '01 M2. | ||
| Cyclonemduece |
my stock harness has one m2 bulb socket and the xb has two headlight bulb sockets. | ||
| Buellboiler |
Perhaps the factory harness is a "Y" harness that combines both light's wiring into one connector. If so, this would help to solve your problem. If no, you could fabricate your own harness, using the correct gauge wiring and mating connectors. Good luck, Boiler |
