G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Whosbeenfartin Posted on Tuesday, October 02, 2007 - 12:26 pm:        I have the passwinder err forcewinder intake on my 99 x1, Came that way from the previous owner. So anyways, is there supposed to be some kind of bracket that holds the throttle body and intake on other than the brace that runs along the bottom. What keeps happening is the entire intake and throttle body vibrates out of the manifolds. The brace on the bottom is as tight as it can be. I have seen in pictures a bracket holding the entire intake to the engine, is this supposed to be there with this intake setup?   Chasespeed Posted on Tuesday, October 02, 2007 - 12:47 pm:        Yep, sure is... It bolts to the heads... Then, when you bolt the air cleaner of choice to the throttle body, that bracket is sandwiched in there, stabilizing the whole set-up Chase   Numb_nutz Posted on Tuesday, October 02, 2007 - 12:50 pm:        I have one of those brackets if you need. No breather hardware just the bracket.   Djkaplan Posted on Tuesday, October 02, 2007 - 02:12 pm:        Is this the bracket you're talking about?   Whosbeenfartin Posted on Tuesday, October 02, 2007 - 03:10 pm:        That brackets not on my bike, so I'm inclined to say yes. Is there any difference between the one for carbed tubers vs EFI tubers?   Brinnutz Posted on Tuesday, October 02, 2007 - 03:15 pm:        Yea, you need that..I wouldn't ride without it...You can get it from any HD shop...It's the : 29429-97Y AIR FILTER BACK PLATE 25.50 I believe that's the part number for the X1... And the 2004 Retail Price from the 04 Price Book..=) (Message edited by brinnutz on October 02, 2007)   Jayvee Posted on Tuesday, October 02, 2007 - 04:09 pm:        Well, if you're going to have to buy one anyway... http://www.crossroadsperformance.com/ecommerce/os/ catalog/product_info.php?cPath=22&products_id=142& osCsid=9acea84aa82a34d5d218808d6a13be1d   Whosbeenfartin Posted on Tuesday, October 02, 2007 - 04:12 pm:        not bad for 15 dollars more, but will it fit: "Fitment: all XL motors with CV carbs" no carbs here   Numb_nutz Posted on Tuesday, October 02, 2007 - 05:00 pm:        If you still need one The one i have is for the forcewinder intake. I went to a carb and scrapped the EFI and switched all of it. The EFI one doesn't have the fourth hole in the flange like the one in the picture above does. $10.00 plus shipping if your interested.   Natexlh1000 Posted on Tuesday, October 02, 2007 - 05:10 pm:        you can't really blame the last owner. The (lousy) instructions that came with mine said to chuck it! No, I didn't.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: