G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Ryker77 Posted on Monday, September 10, 2007 - 03:47 pm:        If you install the oil filter adaptor for an oil cooler. When buying 90 degree bends for a clean install. NOTE that the location of the threads are too close to allow both of them to spin on. You must buy two different styles. One low profile and one high profile. I used a regular automotive fitting for the taller 90degree bend. And was forced to visit homedepot for the low profile fitting. The low profile fitting wouldn't be the highest flowing since its a dead on 90 bend with no curve. I used a lockhart 420 oil cooler from a 1980's sporty. Hose clamps with some heater hose as protection mounts the cooler to the side frame. Looks clean. And was cost effective.   Natexlh1000 Posted on Monday, September 10, 2007 - 07:36 pm:        pics?   Ryker77 Posted on Wednesday, September 12, 2007 - 09:11 pm:        Will do when I get time.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: