G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Hillbilly Posted on Wednesday, March 28, 2007 - 10:03 pm:        I would like to put a X1 aluminum swingarm on my 98 S1.What will I have to change along with the swingarm to make this work?   Firemanjim Posted on Thursday, March 29, 2007 - 02:47 am:        Rear axle is a bit shorter,I had to use a pair of large washers on my S-2.Rear fender from X-1 needed.Need to have all the axle adjusting hardware,other than that it is a bolt on.   Spiderman Posted on Thursday, March 29, 2007 - 07:12 am:        also, on the 98 swing arm mounting block there is a "stop" you will have to grind down.   Aaomy Posted on Thursday, March 29, 2007 - 09:09 am:        http://www.badweatherbikers.com/cgibin/discus/disc us.cgi?pg=prev&topic=47623&page=255090 here is a like to look threw.. it was for my s2 but will show you the mounting block and everything.. you will not have to worry about removing material form the swing arm its self,, that is only for s2 people.. but all the other stuff pretty much applies.. the post is 3 pages long.. at the top of the page click next to go to the next page.. hope this helps.. aaron   Hillbilly Posted on Tuesday, April 03, 2007 - 08:35 pm:        Thanks for the help guys.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: