Author |
Message |
Garrett1998s1
| Posted on Monday, May 08, 2006 - 06:05 pm: |
|
Tried getting one from the dealership with the part number from the service manual. He said he couldnt get me one of them. Read on here not to get a racheting type other than that any other suggestions? Thanks Garrett |
Lake_bueller
| Posted on Monday, May 08, 2006 - 06:09 pm: |
|
I had them put the piston & rings in the cylinder for me. But they also did the boring there as well. I hate to say this but....ebay? |
Bomber
| Posted on Monday, May 08, 2006 - 06:13 pm: |
|
shade tree engineering recommends the use of a honkin big hose clamp . . . . .works fine, with a great deal of care |
Patrickh
| Posted on Monday, May 08, 2006 - 06:56 pm: |
|
I use the big honking hose clamp method, works a treat! cheap too |
Road_thing
| Posted on Monday, May 08, 2006 - 08:23 pm: |
|
I can't get my hose clamps to honk, but they do squeak a little when they get kinda semi-tight... |
Spiderman
| Posted on Monday, May 08, 2006 - 09:56 pm: |
|
I can do it with my hands. All you need is an extra set to hold the cyl. |
|