G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Essthreetee Posted on Tuesday, March 28, 2006 - 11:59 pm:        So I finally cut open my stock exhaust and was surprised by what I found...I couldn't beleive what the exhaust is FORCED through... I was so surprised I created a diagram to show everyone ok so I was a little bored with all the rain....but here it is anyhow... Diagram Stock exhaust.doc (21.0 k)   Bookyoh Posted on Wednesday, March 29, 2006 - 12:48 pm:        Nice diagram. The first time I modified my muffler, I just cut it open and removed some of the outlet pipe and had it welded back together. I tried that for a while and then decided to open up the flow a little more so I took an 8" drill extension and reached in to drill another hole in that end cap. Mark   Essthreetee Posted on Wednesday, March 29, 2006 - 01:05 pm:        I am going to be drilling the endcap as well. I want to have the stock pipe on the bike, but not the stock sound/performance. How much did you drill?? How many holes & What size?? Are you happy with it??   Bookyoh Posted on Wednesday, March 29, 2006 - 10:54 pm:        I think my drill extension is 1/4". Start with one and see how you like it. You can always drill a second or third.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: