Author |
Message |
Wardan123
| Posted on Tuesday, November 29, 2005 - 09:15 am: |
|
I'll start with my 2002 X1W. Later, (when I get pics) I'll show you the X1 "Black" Lightning. |
Ftd
| Posted on Tuesday, November 29, 2005 - 09:17 am: |
|
2002 X1
|
Doughnut
| Posted on Tuesday, November 29, 2005 - 10:52 am: |
|
|
Chasespeed
| Posted on Tuesday, November 29, 2005 - 11:14 am: |
|
I dont even know what to say about the above bike(yellow one)... And, i will post some pics of mine as soon as I finish it... Chase |
Tsispyder
| Posted on Tuesday, November 29, 2005 - 11:36 am: |
|
ill post the link, but someone has to show me how to post it so a picture shouws, i still cant do it [img]http://img171.imageshack.us/img171/8163/img09981mn.jpg[/img] |
Mikej
| Posted on Tuesday, November 29, 2005 - 12:09 pm: |
|
Use the imagelink command, or other more current commands on the site here. |
Blackbelt
| Posted on Tuesday, November 29, 2005 - 01:40 pm: |
|
Ok my turn Here is my 2002 X-1WL, Anyone want to buy it? |
Tsispyder
| Posted on Tuesday, November 29, 2005 - 02:05 pm: |
|
no but wanna sell that rear hugger? |
Jeremy_02_x1
| Posted on Tuesday, November 29, 2005 - 02:14 pm: |
|
I want the CF tank trim pieces. |
Blackbelt
| Posted on Tuesday, November 29, 2005 - 03:39 pm: |
|
rear hugger? |
Natexlh1000
| Posted on Tuesday, November 29, 2005 - 11:13 pm: |
|
Here is my X1 a couple of days after I got it home. It started to snow on my ride home and it didn't stop. Pipes aren't even blue yet! Here it is with its older brother. The first revision of my "forcewinder" installation at about 8000 miles. This dates from Mike and my ride to the catskills to meet up with Gomo and others. (the end of april) It was cold but we had pancakes so everything turned out ok. Hi Mike! (at rest area) Ride to leak; Leak to ride! HA ha ha ha!!!
|
Oldog
| Posted on Tuesday, November 29, 2005 - 11:21 pm: |
|
from the porch 2001 x1 have a CF Chin Faring now |
Oldog
| Posted on Tuesday, November 29, 2005 - 11:27 pm: |
|
and a custom Billet, dash by Aaomy |
Blackbelt
| Posted on Wednesday, November 30, 2005 - 11:40 am: |
|
you have dual oil temp gauges? what up oldog? |
Oldog
| Posted on Wednesday, November 30, 2005 - 12:15 pm: |
|
No sir center is pressure left is temp Aaron did a great Job, You hear from him lately? On an aside I just read your post on reflections you are having indications of possible oil pressure problems, dude check the drive gear on the crank |
Blackbelt
| Posted on Wednesday, November 30, 2005 - 01:41 pm: |
|
That is what i am gonna do.. but first i am gonna see if it is the pump.. by pulling the return line and see if anything is pumpin out.. better that than tear apart the case.. know what I mean |
Raceautobody
| Posted on Wednesday, November 30, 2005 - 01:49 pm: |
|
Buell needs to bring back white bikes Al |
Oldog
| Posted on Wednesday, November 30, 2005 - 01:58 pm: |
|
BB: the job is actualy not to bad if you change the gear to the improved bronze one, as I just did it acouple of weeks back. get the crank gear holding tool, not bad at all. X1 Pic |
Chasespeed
| Posted on Wednesday, November 30, 2005 - 02:30 pm: |
|
Dog, you had to do all that just to do the gear? Wow...I think its been too long since I hav been aquainted with my bike...I NEED TO GO HOME! Chase |
Oldog
| Posted on Wednesday, November 30, 2005 - 03:54 pm: |
|
Chase: I did more than that Front: over haul front caliper, clean MC, dropped front end, replaced the head bearings, changed fork oil, replaced brake fluid, cleaned up some routing issues, lubed cluch cable, Rear, replaced Isos, Bearings, Seals, inspected exhaust mounts, belt and pullys, shock & mounts Engine, replaced, header studs, nuts, gaskets, rocker box gaskets, gearcase gasket, oil pump gasket, intake seals, tb seals, pushrod tube seals, remove and clean the tb, check the intake manifold and injectors inspected cams and lifters, checked condition of lower wiring. and replaced the steel drive gear with the bronze one. Installed a CF chinfaring I have ridden over 400mi I will replace Plugs and battery this spring if funds permit. picture (tree out of bike, lower race is pressed on for the X1 |
Natexlh1000
| Posted on Wednesday, November 30, 2005 - 08:39 pm: |
|
Ahh KLEIN tools rock. I have a pair of those pliers at work. They are in my right hand for about %25 of my day. |
Ryker77
| Posted on Wednesday, November 30, 2005 - 09:08 pm: |
|
dooughnut.. were can I find out more about that yellow bike or get more pics.. |
Nitsebes
| Posted on Wednesday, November 30, 2005 - 10:39 pm: |
|
|
Schd2002
| Posted on Thursday, December 01, 2005 - 01:46 pm: |
|
2000 Racing Red Stripe. Now metallic black w/ silver stripes and lots of chrome (Message edited by Blake on December 04, 2005) |
Chasespeed
| Posted on Thursday, December 01, 2005 - 02:50 pm: |
|
I LIKE that tank..... Chase |
Deltacruiser
| Posted on Friday, December 02, 2005 - 10:53 am: |
|
|
Oldog
| Posted on Saturday, December 03, 2005 - 12:06 am: |
|
Delta: is the fly screen CF too? can you post a front angle? I want to remember you did that tail cleanup?
|
Wardan123
| Posted on Saturday, December 03, 2005 - 09:59 am: |
|
And now my X1"Black"Lightning (actually it's just a 2002 X1W with black body work...but it's nice for contrast.) Wardan123 |
Ryker77
| Posted on Saturday, December 03, 2005 - 10:54 am: |
|
Delta, I'm curious too. Whats the deal that the undertail section? Its nice, clean and smooth. I really don't like the CF undertail on my bike |
Ryker77
| Posted on Saturday, December 03, 2005 - 11:00 am: |
|
(Message edited by ryker77 on December 03, 2005) |
|