G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Jb348 Posted on Wednesday, May 11, 2005 - 09:00 pm:        anyone know if a front brake rotor/carrier assembly from a 2000 X1 will bolt up to my stock 99 M2 wheel and work with existing brake caliper? JB348   Aaomy Posted on Wednesday, May 11, 2005 - 09:25 pm:        yupp.. it will . im not sure what brake rotor material your old rotor is. most old ones like mine are cast iron. the new ones are stainless steel i think. i also think they may recommend changing pad material when you switch between the two. but it will bolt up fine. you may want to check the knowledge vault. if not im sure other will chime in soon.   Bluzm2 Posted on Wednesday, May 11, 2005 - 09:57 pm:        It will bolt right on. Make sure you buy new bolts too. Even if you don't bugger the old ones, they should be replaced. Be prepared to fight the bolts. They can be a real struggle.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: