G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Kyryder Posted on Sunday, March 04, 2018 - 05:41 pm:        Hello all, I need to remove both my front and rear tire however I can not seem to find the nut size for these bolts does anyone happen to know them? I have a torque wrench but no socket to fit them. Thanks!   H0gwash Posted on Sunday, March 04, 2018 - 07:48 pm:        I use a 15/16 inch on the front. I have a little hose clamp behind the nut so I can see it hasn't loosened. For the rear I use a 36mm socket and a smooth jaw wrench on the other side to prevent spinning. There is a note in the Good Book about this nut being metric. My 36mm feels a little loose so maybe a 35mm is adequate? The Good Book also says to retighten to 70 ft lbs, but if I go there, everything binds up I think too much, so I've safety wired mine at a looser setting. What do other people do? (Message edited by h0gwash on March 04, 2018)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: