G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Just_ziptab Posted on Monday, September 01, 2014 - 10:56 pm:        What are you using to seal the rubber boot for the gas filler bezel on X1/tube frame Buells? I have Threebond 1104, Permatex Hylomar,Permatex Form-A-Gasket , blue\red\black Silicone sealer and Elmer's glue. I kinda think that Elmer's glue is out....   Alfau Posted on Monday, September 01, 2014 - 11:40 pm:        I kinda think that Elmer's glue is out.... Elmer's glue is exactly what you use if you used glue at all! lightly pressure test if removed with compressed air and soapy water. I loosened mine to drain water from the tank and refitted with no problems.   Buellkowski Posted on Tuesday, September 02, 2014 - 10:22 am:        I used Hylomar.   99cyclone Posted on Tuesday, September 02, 2014 - 10:07 pm:        Hylomar

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: