Author |
Message |
Natexlh1000
| Posted on Friday, August 19, 2011 - 10:53 pm: |
|
I used the customary curved hemostat to remove the dead bulb but couldn't get the clip back in with the same tool. I was frustrated but I was also at WORK. so that means I had access to one of these:
The pronged side worked very well. popped it right in with no effort at all. I use it at work all the time to thread wires and stuff in little aluminum boxes:
Yeah baby, that's what I'm talkin' about. Anyways, after much gooling, I found where one of these things can be purchased: http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=M-130/SX-ND |
Natexlh1000
| Posted on Friday, August 19, 2011 - 10:54 pm: |
|
ha ha "Bulbe" I'm not even fixing that. |
Ourdee
| Posted on Saturday, August 20, 2011 - 12:09 am: |
|
I changed my last bulbe bare handed no tool in the parking lot at Gus's diner. |
Bartimus
| Posted on Saturday, August 20, 2011 - 08:16 am: |
|
Is gooling anything like drooling? |
Natexlh1000
| Posted on Sunday, August 21, 2011 - 08:59 am: |
|
I tried the no-tools method but could only get one side of the spring in. |
Sparky
| Posted on Sunday, August 21, 2011 - 02:53 pm: |
|
Use a left-handed hemostat. |
Ourdee
| Posted on Monday, August 22, 2011 - 12:27 am: |
|
Scar tissue on my left hand lets me push pretty hard. |
Skinstains
| Posted on Monday, August 22, 2011 - 12:51 am: |
|
What model bike are we talking about ? |
Ourdee
| Posted on Monday, August 22, 2011 - 03:40 am: |
|
Me, 08 XB12XT |
|