G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   T9r Posted on Monday, August 08, 2011 - 09:47 pm:        This connector is from the 2008 XB wiring harness leading towards the fuel pump. Question of the hour: Who makes this one? Where can I get one other than the dealer?   Ducxl Posted on Monday, August 08, 2011 - 10:36 pm:        I think it's a Packard connector(Look for "PED" cast into a part of it.) It looks "pull to seat" though and may be Deutch look here for info and contacts I used>>>IN THE KV<<<   Griffmeister Posted on Monday, August 08, 2011 - 10:43 pm:        You need to look at the plug that mates with it. There might be some letters and/or name on the lock tab. Looks like that might be a Metripak, if so it should have PED on the tab but then again it might be a Delphi. Check the other plug then report back if nobody else chimes in before then.   T9r Posted on Tuesday, August 09, 2011 - 08:37 am:        By looking at the wiring this connector goes to the Active Muffler Control Actuator Motor. So that is the mate. --Back to figuring out what the Fuel Pump connector is off the wiring harness on the 2008.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: