Author |
Message |
Steveford
| Posted on Wednesday, July 27, 2011 - 07:37 pm: |
|
Is there anyone in my area (Stewartstown, PA) who could help me reset the TPS on my Useless? I have a "new" race ECM which really needs a reset to work on mine. I can NOT get ECM spy to download worth a bean and it's either do it at home or truck the bike down to Baltimore. Thanks in advance, Steve Ford |
Greg_e
| Posted on Wednesday, July 27, 2011 - 08:58 pm: |
|
If it is the Race ECM from E_B_R they say not to use ECMspy on these computers. There is a thread down in the XB forum about this. If it is the old race ecm you can PM me and I'll try to help. |
Toona
| Posted on Thursday, July 28, 2011 - 09:06 am: |
|
I'm close to Altoona, PA and have the VDSTS software and can do the TPS reset for you. Let me know if I can help. alumicraft at gmail dot com |
Ratbuell
| Posted on Thursday, July 28, 2011 - 10:45 pm: |
|
I need to send Michael a note...is ECMspy not recommended at ALL with an Erik Buell Racing ECM? Or just not recommended for altering it? I'd think a TPS reset would be OK....anyone asked them specifically about this? |
Greg_e
| Posted on Thursday, July 28, 2011 - 10:59 pm: |
|
http://www.badweatherbikers.com/buell/messages/327 77/639670.html?1310444425 but from what Mike says it should work fine so I'm not sure and someone should specifically ask E_B_R what they recommend for simple tasks like TPS reset. |
Deltablue
| Posted on Friday, July 29, 2011 - 10:13 am: |
|
Steve, I used to be a lot closer to that area, but am currently about 45 to an hour away. I have ecmspy. Erik Buell Racing does not support the use of ECM spy because according to them it writes info in eroneous areas. I can help if needed. |