G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Kdancingbear Posted on Wednesday, August 09, 2006 - 10:41 pm:        any tips on installing the bars. is there any mods?   Brad_buell Posted on Wednesday, August 09, 2006 - 11:56 pm:        I have the American Sport Bike Zero Degree Crossroads bars on my XB9S. Installation wasn't too bad. The only tricky part is the routing of the clutch cable. Some guys have drilled a hole in the left side flyscreen support to route that clutch cable through. That method seems to put less stress on the cable. I might eventually do that if I run into any future problems with mine. Good Luck. You won't be sorry after you install them. You can see them in my profile. (Message edited by Brad_buell on August 09, 2006)   Glitch Posted on Thursday, August 10, 2006 - 08:37 am:        http://www.crossroadsperformance.com/downloads/9060.pdf   Blake Posted on Thursday, August 10, 2006 - 01:55 pm:        See Keith's (Skully's) log in the Tale Section... http://www.badweatherbikers.com/buell/messages/6817/197224.html

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: