| Author |
Message |
    
Oldog
| | Posted on Tuesday, August 08, 2006 - 01:51 am: | 
|
that has to be an english flux capacitor,
Its got whitworth fasteners on the terminals,
can you get blinker fluid in imperial gallons? i need some for the truck |
Diablobrian
| | Posted on Tuesday, August 08, 2006 - 01:55 am: |
|
It's the finest Flux capacitor Lucas Electrics produces! |
Mr_grumpy
| | Posted on Tuesday, August 08, 2006 - 06:01 am: |
|
This is true, however I think you'll find it listed in the Lucas catalogue as a "Fetlockstrongler Valve" which is the English term for the said item.
Also NEVER use fully synthetic blinker fluid in a fetlockstrongler valve, it will cause intermittent refluxtion, semi-syn will do at a pinch but full-organic is best.
My good friend Prince Rastus O'Dinga O'Dinga can supply you with the necessary at a very reasonable cost. |
Road_thing
| | Posted on Tuesday, August 08, 2006 - 10:17 am: |
|
Hey, Prince Rastus was supposed to put $30,000,000 in my bank account last week!
rt |
Damnut
| | Posted on Tuesday, August 08, 2006 - 10:23 am: |
|
I love this!!!!
This thread is SOOOO much better without all the whining.
Hey Slaughter Thanks for the heads up on the bucket of steam!!! The last thing I want to do is trash my muffler bearing.
I have a set of 4/3" Manzak dirigible pliers but no Knifler pin......... Why the hell would I have a set of 4/3" Manzak dirigible pliers.............callin shrink now |
Pwnzor
| | Posted on Tuesday, August 08, 2006 - 10:34 am: |
|
I've got the pin, it's the Manzaks I need. Without those 4/3" dirigibles I am only 3/2 of a person inside.
 |
Damnut
| | Posted on Tuesday, August 08, 2006 - 10:50 am: |
|
I'll trade you the pin for the Manzaks. |
Firebolteric_ma
| | Posted on Tuesday, August 08, 2006 - 11:10 am: |
|
I have both the 4/3" Manzak dirigible pliers and the Knifler pinfor sale RIGHT NOW!!!! Get it before it ends up on B-gay!
I take casheesh or tourist Kool-aid marked bills.
I'll sell both for 69.0032 cents.
PLEASE send correct amount, i have no more change.
Oh and quick question>>>>>>>>>>>>>>>
i dropped some of the blinker fluid on my exhaust bearings....they are blinking now, will this hurt anything?
what if it gets rusty and seizes up...will it be stuck in the on or off position?
Thanks for your time with my questions! |
Hattori_hanzo
| | Posted on Tuesday, August 08, 2006 - 02:15 pm: |
|
I can't help but check out all the killer performance parts at Kale Auto! I am SO getting this dual exhaust set up for my Miata.
Check the description out!
You've heard of the Y pipe.. the X pipe.. the H pipe.. nothing can touch the O pipe!!! It provides 100% back pressure feedback on ALL engines!! Torque increase and kuneutson valve float brings in much lower revs so you don't hurt your motor! Not CARB Legal. Please specify standard or polished finish. Product shown is dual input O-Pipe with standard finish. |
Whodom
| | Posted on Tuesday, August 08, 2006 - 02:34 pm: |
|
Man, think what that O pipe would do for our V-twins! |
Marhaba
| | Posted on Tuesday, August 08, 2006 - 03:09 pm: |
|
Hey Grumpy thanks for the info on Prince Rastus and his donkey smuggler Libyans. I'll be in Tataouine Tunisia for a week and I'll be able to pick it up from him then. Will he be able to accept a check on the back of a coconut leaf? Because that's all the currency I've got right now. Your exhaust bearings should be fine, Firebolteric_ma, if you don't want them to blink anymore just go ahead and use a generous bucket of steam to clean it off. And if that doesn't work, borrow Diablobrian's 50ft water line. And if that STILL doesn't work, I'll drop off a little plutonium for you to apply to it. That should do the trick if nothing else works. However, once you're done with the plutonium, wrap it up in newspapers with a generous helping of kitty litter to absorb all the extra radioactive-ness, and place it in the nearest sewer, preferably near a fresh water supply so as to dilute the radioactive particles as soon as possible. Remember, ALWAYS be responsible about the environment! |
Firebolteric_ma
| | Posted on Tuesday, August 08, 2006 - 03:19 pm: |
|
THANKS for the tips!!!!
will follow them there directions to the "T" and see how I make out.
thanks for the help guys!
I love this place!!!! |
Buellgirlie
| | Posted on Wednesday, August 09, 2006 - 12:58 am: |
|
sssssshhhhh, is she gone? can we come out to play again?
D |
Tramp
| | Posted on Wednesday, August 09, 2006 - 08:50 am: |
|
shh! fake sleep! |
Firebolteric_ma
| | Posted on Wednesday, August 09, 2006 - 09:38 am: |
|
ZZZZZZZZZ ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ ZZZZZZZ  |
|
