| Author | Message | ||
     Maxxx |
Anyone willing to scan or link to one online would be much appreciated!!! cnco@earthlink.net | ||
| Mr_grumpy |
What do you need to know? | ||
| Maxxx |
Conversion of FI to carb ... switching harnesses S3 to M2 | ||
| Hans |
I think you need the Service manual and the parts catalog. There are different wiring diagrams: For instance: The starter system. But all diagrams are very abstract. I have spend more than an hour to try to get a proper scan. No good results because the extremely fine lines and smallest text. And the different connectors and cables are scattered in the parts catalog between the parts, they belong to. Hans  | ||
| Mr_grumpy |
Check the KV on this, you may not need to change the harness, I seem to remember someone posting that it's quite a simple job. You'll probably have to do some digging to find what you need to know but I'm pretty sure it's in there. Best of luck. | ||
| Maxxx |
Thanks for the replies. I see what you mean about the fine line diagrams in the manual...will have to buy instead of scan...also, found some more info in the KV and spoke to a few technicians ... said better off keeping existing harness and taping off sensor leads...if done well, should be able to convert back to FI in the future if necessary |
