G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Smokinjryan Posted on Thursday, May 11, 2006 - 08:27 pm:        Well I got a mikuni 42mm carb in the 99 M2 I recently got. I needed to change the slow jet as it was a 20 I need at least a 27.5 or a 30. So I got my jets I also got a 165 main. That was no problem but when I tried to change the slow jet both jets I had got crushed at the top!!!!! So I had to put my 20 slow jet back in and all was back to normal. What am I doing wrong???? Thanks   Smokinjryan Posted on Thursday, May 11, 2006 - 11:49 pm:        could it be cause I bottomed the throttle Valve by turning the idle screw out?? Like when you change the needle? Would I hit the slide?? I trashed both pilot jets crushed at the tip but my #20 pilot worked but I just dont know if I turned idle srew back ahhh????

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: