G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Tgroghan Posted on Tuesday, May 09, 2006 - 11:10 pm:        What is the procedure for resetting the TPS on a 1999 S3? What are the values that it is to be set to? If it is similar to the procedure Al wrote then I have that, but still need the values to set it to.   Al_lighton Posted on Wednesday, May 10, 2006 - 12:47 am:        There really isn't any worry about the value to set the TP to after you've done the reset procedure. The TP value of 5.1 specified in my procedure after you've done the true zero set is just a value that should let the bike start and idle (likely a tad low). The value you set the TP after the bike warms up is not a TP value at all, it's an idle tach value. 1050 RPM is the right value for that, tuber or XB. Al   T9r Posted on Wednesday, May 10, 2006 - 07:41 am:        Thanks... it is starting to make sense to me. Like learning a new subject in school.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: