G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Giarcg Posted on Thursday, September 03, 2020 - 09:15 am:        Recently replaced the failed OEM regulator on my Uly with a FH020AA unit (works great) and struggled with coming up with an adapter setup for mounting it. Turns out some 3/4" thick furniture grade hardwood provided an easy answer. Easy to fabricate with a bandsaw using the original reg as a pattern. (Recommend allowing extra wall thickness around the bolt holes). Teak oil for preservation. Provides needed spacing for the connectors to clear as well as heat/vibration isolation. If it lasts only a few years it would take twenty minutes to fabricate another. I like it.... a constant 14.2 volts is sweet as well. (Message edited by giarcg on September 03, 2020)   Tpehak Posted on Thursday, September 03, 2020 - 02:26 pm:        https://www.buellxb.com/forum/showthread.php?52517 -Harley-Davidson-Sportster-Voltage-Regulator-on-Bu ell-XB   Giarcg Posted on Thursday, September 03, 2020 - 03:32 pm:        Great... if you got one of these: if not, one of these gets it done my way: (Message edited by giarcg on September 03, 2020)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: