Author |
Message |
Jaukenx1
| Posted on Thursday, March 08, 2018 - 10:23 am: |
|
Hi guys, new to this site and a new owner of a Buell last summer, from Norway. I was out riding and stopped to take a break, when I was on my way again, it just start for like 5-20 sec, and on a HIGH RPM before it dies. I have not reset TPS or AFV, but I read some about the exhaust I got with the bike which I mounted. (Pro Series Race Kit Fits S3.) I was supposed to plug the o2 sensor, but instead i mounted the o2, is that broken now and messing with the ECM? Or may the problem be in the ECM on another way? The former owner says the map is for Torque Hammer and should be good enough for this exhaust. First I thought it was the ignition, it was melted it seemed, so I switched it with a new one, but the bike is acting the same old way still.. Hope some of you guys can help out. Peace! |
Akbuell
| Posted on Sunday, March 11, 2018 - 10:57 am: |
|
Since you don't mention a Check Engine Light warning, I will guess you don't have one. If the sidestand switch has not been disabled, I would start there. If that doesn't solve the issue, might look at the fuel pump and see if it is maintaining proper pressure. Hope this helps, Dave |
|