G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Davew_tx Posted on Thursday, February 09, 2017 - 01:57 pm:        2006 XB12X. stock. Bike won't run past a sputtering 5 seconds. So, we now think my ECM is dead and I bought a new blank Y0152.3a8 blank from a dealer. It's supposed to be compatible. DIY question. I have the ecmspy 1.12.27 and cable and it communicates with the old ecm in the bike. Is it as simple as saving out the old EEPROM.txt and map.msq files from the bike. Then swap in the new ECM. connect ecmspy, then burn the EEPROM (with my map loaded into it)? I'm assuming my old firmware will burn into the new ECM, being listed as compatible. I've searched and can't find anyone listing how to install a new blank ECM. Someone said it's a dealer visit, but I'd like a DIY method. Thanks in advance. Dave   Terrys1980 Posted on Monday, February 13, 2017 - 09:43 am:        That should work. BUEIB310 is the stock firmware for the 2006 XB12 and BUEGB231 is the race firmware.   Davew_tx Posted on Monday, February 13, 2017 - 10:54 am:        OK, that's what I'll try. thanks.   Froggy Posted on Monday, February 13, 2017 - 02:02 pm:        How blank is the new ECM? My understanding is these days they ship without any firmware, and then the dealer uses their computer to upload the firmware and program after punching in your VIN. If it is that blank, even ECMspy won't even be able to help you as it can't change the firmware. If it already has the same firmware version, you can do the reflash like you describe.   Davew_tx Posted on Tuesday, February 14, 2017 - 10:50 am:        I don't know how blank it is. i'm going to try later today. A dealer visit may be needed.   Davew_tx Posted on Thursday, February 16, 2017 - 10:59 am:        OK, so it wasn't the ECM. When the tank located hoses to pump/regulator exploded, some debris got in the line and fouled my injectors. Either that or while disassembled for a few weeks in the shop, some dirt got in the fuel line and went into injectors. Either way, it's on the way back home soon. I might have a new and never plugged in ECM on Ebay soon.   Reepicheep Posted on Thursday, February 16, 2017 - 12:37 pm:        Good news! Thanks for the resolution, it may help somebody else someday.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: