G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Tbows3 Posted on Friday, March 08, 2013 - 07:04 pm:        I have an 01 S3, and I want to put an aftermarket air filter on it, becaus after dumping it lastyear, I had to replace the whole outer assembly. The new back plate did not have a gasket on it, nor did the box cover. I am using weather stripping, but it is not holding up to the heat. any body know where I can find an aftermarket intake? One that would require minimal alterations.   Bluzm2 Posted on Saturday, March 09, 2013 - 12:11 pm:        As mentioned in another thread, the Race Ham Can is a good replacement. Some folks like the Force Winder.   5liter Posted on Saturday, March 09, 2013 - 12:54 pm:        I have this on my S3T.http://www.americansportbike.com/shoponline/ccp0-p rodshow/17005.html The billet backing plate is really nice.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: