Author |
Message |
Bottlefedbuell
| Posted on Monday, July 02, 2012 - 09:24 am: |
|
All, i am wondering if anyone has ever run into this. Recently, I had pulled my lighting fuse to do some TunerPro work and noticed that the light did not go out. I chalked it up to being a result of the 'Both Lights On' mod, and didnt worry about it. --This mod was done by the previous owner. Yesterday, i had flipped my bright light switch on while the bike was not running and it re-initiated the Fuel Pump. Now, when i start the bike and flip the bright on, the bike will stutter for a second, almost like it is missing or arcing out somewhere. I have not yet had a chance to dig into the harness and see if i have a bad wire somewhere, but if anyone has a clue on where i should start my diagnosis, that would be great. Thanks --Nick |
Sparky
| Posted on Monday, July 02, 2012 - 01:44 pm: |
|
Chances are all your problems would be resolved by finding out whatever wiring shenanigans the previous owner did. Then if you know there were some wiring mistakes made by the PO, undo those and either wire up the mod correctly or return the wiring back to stock (which would be 100% reliable). |
|