G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Jramsey Posted on Tuesday, September 27, 2011 - 01:41 pm:        Oldog. Here's some pics of the vise I made for the lift. Adjustable fixed jaw I was telling you about last night,1" slots in the plate and 2 sets of holes 1" apart in the lift base with solid plate underneath drilled& tapped for 1 hex key wrench adjustment. Welded 2 bungs on front uprights for a piece of rod to pass thru for a tire stop, Handy when loading bikes unassisted, also eliminates bashed rotors. I used 2x3x.120 wall rec.tube, 4 pieces 15 inches long as that's what I had laying around. I cut 1 end on each 35 degrees for a 70 degree angle, clears all rotors and fenders so far. Also I welded a pin underneath in front and threw together a dolly for wheeling the lift around the shop (Message edited by Jramsey on September 27, 2011)   Speedfreaks101 Posted on Saturday, March 03, 2012 - 10:47 am:        Nice work. Is the base a pallet jack?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: