G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Texas_firebolt Posted on Saturday, February 05, 2011 - 02:51 pm:        Downloaded EcmSpy and installed the driver. When i have everything ready, with the ignition switch on and the run/stop button on run, i hit connect. It pulls up COM3 and when i hit ok it doesnt do anything. If i go to autodetect it will say "got COM port" but nothing happens. I dont get any readings on anything. Im stumped and not that computer savvy so please someone help me!!   Texas_firebolt Posted on Saturday, February 05, 2011 - 03:28 pm:        It worked briefly, then in the middle of a TPS reset, it froze. The numbers were there but they didnt change when i turned the throttle, etc... I tried reconnecting and it wont do anything now(again). This is frustrating me to no end...   Terrys1980 Posted on Saturday, February 05, 2011 - 11:25 pm:        When you do a tps reset it does disconnect. The COM port might be stuck open, try restarting the computer.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: