G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Atbabc Posted on Wednesday, December 22, 2010 - 02:42 pm:        I have a carbon fiber undertail on my bike similar to the ones pictured in the following links: http://www.twinmotorcycles.nl/webshop/artikel.asp? guid=YXHFSC&aid=3169&cid=290&s=&a= http://www.buellxb.com/Buell-XB-Forum/Buell-Lightn ing-XB12S-XB12Ss-CityX-XB12Scg/Troubleshooting/XB1 2S-fender-eliminator-help The undertail was installed by the previous owner. Recently, the led's that face downward and illuminate the license plate have started flickering badly, and a couple have gone out completely. I thought about trying to take the light apart and replace the LED's, but the lense and housing seem to be fused together and I can't figure out a way to get them apart without trying to cut the plastic lense. I thought I'd see how much it would cost to just replace this entire tail light. After hours of searching, I've only found one light that looks like it MIGHT work: http://www.twinmotorcycles.nl/webshop/artikel.asp? guid=YXHFSC&wc=DBCB7DC4-AB5C-4517-AED4-55596D23CFC 7&cid=48&s=&a=a&aid=1540 I'm not even sure if it fits or not. Wanted to see if anyone else had this same undertail and knew where to get the light that fits in it, preferrably from a US source. Thanks!   Atbabc Posted on Monday, January 17, 2011 - 09:49 pm:        Anyone have any ideas on this?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: