G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Midway15 Posted on Monday, November 16, 2009 - 03:20 pm:        Looking to go back to my stock exhaust from a Drummer. I have all the parts I think I need (front muffler strap, stock muffler, replacement interactive exhaust cable, old exhaust servo, stock ECM). The only thing I am missing are the bolts used to attach the exhaust servo back onto the airbox. There are three of them, and they look like they'd be long and skinny. Does anyone know the length and thread pattern of these bolts? Cap pattern doesn't matter too much, can make do with anything there. Thanks!   Midway15 Posted on Thursday, November 19, 2009 - 11:36 am:        Just a follow up FYI: I just took the airbox cover with me to the hardware store and tried a number of fasteners until I found one that worked. The size/thread pattern of the bolt is 10/32, and I went with a 1.25" length. The store I went to didn't have hex cap in the length I wanted, so I settled on a bolt cap. Seems to work just fine.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: