G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Pitbullss Posted on Saturday, July 04, 2009 - 03:04 pm:        Im wanting to remove the stock ignition cover on my 06 SS and fashion it with a custom plate. Has anyone drilled out their rivets and mounted a custom cover successfully??}   Clutchless Posted on Saturday, July 04, 2009 - 04:38 pm:        yea homie, I think i used a 5/32 drill bit on them and they pop right out. Use sharp bits. seen lots of creative things put there.   Dentfixer Posted on Saturday, July 04, 2009 - 05:13 pm:        Yeah but what size tap and screw after drilling out the rivets?   Jramsey Posted on Saturday, July 04, 2009 - 05:29 pm:        10-32   Pitbullss Posted on Sunday, July 05, 2009 - 03:08 pm:        thanks Clutchless...just found a kit on ironmachine.com and thats all it is, a drill bit and 5/32 tap combo, easy enough.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: