G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Newbuellertoo Posted on Sunday, March 29, 2009 - 10:14 am:        Okay, I've checked the knowledge vault but don't see what I'm looking for. Has anyone tried the American Sportbike 1" risers on a S3T? When I measured yesterday, with the bars at full lock, there was only about 3/4 " clearance to the underside of the fairing. Any suggestions, experience with this? Thanks All   Newbuellertoo Posted on Sunday, March 29, 2009 - 07:16 pm:        Bump   Newbuellertoo Posted on Saturday, April 04, 2009 - 06:15 pm:        So that's how it's going to be is it? I get one stinkin NEBO patch and now no one will help me out! Seriously, anybody tried the risers on a S3T?   Buell_bert Posted on Saturday, April 04, 2009 - 06:46 pm:        Hey Newb I have M2's and have used S3T or Blast bars to raise my sitting position. Do you have just the speedo or speedo/tach combo? I may know of an aftermarket set of bars you could use.   Vecchio_lupo Posted on Wednesday, September 30, 2009 - 07:47 am:        I don't know if it helps, but my S3T came from the previous owner with a home made spacer (extra top clamp flipped over)of about 3/4" - 1" and the stock bars with no cable mods. It works great for me, very comfortable on 400 mile days.   Newbuellertoo Posted on Wednesday, September 30, 2009 - 05:50 pm:        Thanks Joe.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: