G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Sneth Posted on Friday, March 06, 2009 - 05:36 pm:        Mine was melted beyond repair i found out. i wanted to know if there was an upgraded part number or substitute connector to use in place of this piece? it would be a pain to keep replacing this part. melted (Message edited by sneth on March 06, 2009)   Buell_bert Posted on Friday, March 06, 2009 - 07:04 pm:        The quick way would be to solder quick connects and use heat shrink and electrical tape. And of course just good quality quick connects would get ya home.   Djdp Posted on Tuesday, March 17, 2009 - 03:56 pm:        I just bought a voltage regulator because mine had gone bad and the new part number is actually a kit that includes new non-Packard style connectors that you're supposed to replace the old 77 with. So I guess there's been enough issues with these on 2003 XB9s that Buell has actually made the old style obsolete. The kit is also now a different part number replacing the Y03 with Y1302.02A8. So yes, you can probably ask HD or find these 2-pin connectors.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: