| Author | Message | ||
     Bigolebuellfan |
Okay-I need help. I bought a set of Blast bars for my M2l. From what I've read on here in the KV, they should swap out with no problems. Unfortunately, the instrument cluster is too wide to clear the bars. Other than getting rid of the bars (I do like the riding position), does anybody have any ideas? Is there a different instrument cluster or setup I could use? It doesn't look like there's enough clearance between the edges of the cluster and the gauges to mod the gauge cluster. | ||
| Fasted |
http://www.badweatherbikers.com/buell/messages/21/ 398252.html?1222647142 | ||
| Buell_bert |
I left a note in your other posting but I did use the same bars on my 2000 M2 but it had just the speedo not the speedo/tach combo. Although I will still try to fit a pair on my 2001 M2 which does have the speedo/tach. I really liked the higher bars. | ||
| Fasted |
after they don't fit right and screw up your clutch cable due to lack of clearance, try the precision engineering risers suggested. they will seem really cheap after the bars and cable...... |
