G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Troubleshooting (Poor Starting/Running/Handling/Ride Issues) » Archive through September 10, 2008 » 08 XB12R W/ Micron Exhaust

« Previous Next »

Author Message   Zenoah1439 Posted on Sunday, September 07, 2008 - 01:42 pm:        Hey All, I recently installed a Micron exhaust on my 08 12r and went through the learning mode on the stock ECM. I also have a TFI installed which is supposed to work on the 08, but i'll get to that later. Currently, the TFI is off, and everything seems to run fine, cept there's a very slight power loss during mild acceleration (non WOT) around 2500 RPM. If the bike is run hard (WOT), it has more power than I know what to do with and the power loss doesn't show up. My question is this, is there any way to re-program or tweak the 08 EFI yet? I heard rumor that there is a way to get ECM spy to work on the 08's but havent found anything solid on it yet. I doubt the TFI can eliminate my issue below 3k RPM, as it only works from a base RPM up to redline (not to mention that im much less than pleased with the TFI at this point). Any advice would be appreciated.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: