G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Grizzbo Posted on Saturday, August 16, 2008 - 03:58 pm:        Hey everyone, ok well here it is. I have a 95 S2. I had been noticing recently some popping in the exhaust when I down shift and decelerate. The bike is near 30k so I decided it was time to replace the intake and exhaust gaskets. I was hoping this would take care of things. But guess what...It hasnt...So does anyone have any ideas of what this might be?   Blake Posted on Saturday, August 16, 2008 - 10:12 pm:        heck for header leaks. If none are found, then check/tighten/replace the exhaust port to header-pipe gaskets, again if necessary.   Tazmania720 Posted on Saturday, August 30, 2008 - 04:16 pm:        I would check for cracks in the pipes too. I have a nice size crack that I am getting ready to fix.   Grizzbo Posted on Thursday, September 04, 2008 - 05:31 pm:        ok you are not going believe this. But I just did a quick carb rebuild with a new accelerator pump etc. as well as new jets 45/190 vs the 48/185 and the popping has disappeared....go figure cause I never thought it would have been caused by the carb. Thanks for the input guys,.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: