| Author | Message | ||
     1203beamsm2 |
I OWN A 99 M2 CYCLONE, AND IM HAVING SOME PROBLEMS. NOT REALLY A TOOLER BUT I HAVE BUDDYS THAT ARE! I NEED TO FIND WHUT IT IS MAKING MY BIKE DO WHAT IT IS! I WILL BE STOPPED AT A STOP LIGHT IN FIRST GEAR, WHEN I RELEASE THE CLUTCH OUT AND GIVE IT GAS THE BIKES SEEMS TO MAKE A WEIRD CRUNCH NOISE. IF I START THE BIKE IN 2ND IT DOESNT DO IT. AND ITS NOT AN ALL THE TIME THING, JUST PERIODACLLY. IVE CHECKED LEVELS OF FLUIDS, PRIMARY FLUID MAY NEED CHANGED BUT SHOULDNT BE CAUSING THAT PROBLEM. ALSO NUETREL IS HARD TO FIND. IM NOT RIDING IT AS MUCH I USSAULLY DO, AND IT SCARES MY OL' LADY HAHA. AND AFTER ALL THAT, MY SPEEDOMETER DONT WORK!! ANY HELP IS APPRECIATED IM JUST HOPING ITS NOTHING TO EXSPENSIVE THANK YOU -BEAM  | ||
| Sloppy |
3 easy steps: 1. Get Factory Service Manual 2. Adjust Primary Chain Tension 3. Adjust Clutch There! | ||
| Sacorski |
I am having the same problem! When I stop at a light and put it in neutral It shifts into 1st very hard and then will kinda,slip- lunge-slam into 1st again. It also seems to be a little noisy. I thought my primary was to loose so I spent a couple hours making sure it was adjusted "as the book says" along with the clutch, but it still does it. Also my primary cover gets pretty hot during a ride. Too hot I think. Help Im just a poor biker wanting to ride} | ||
| Reepicheep |
Did you pull the primary cover and look to see if you have a broken primary tensioner shoe? |
