G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Brakes2late Posted on Friday, May 30, 2008 - 08:58 pm:        Looking to borrow a cable to use to set up my race ECM on my 06 Uly. Not sure where to post this but I guess I'll start here. I just downloaded ECM spy and might need some help using it the first time. (Message edited by brakes2late on June 07, 2008)   Jlnance Posted on Friday, May 30, 2008 - 11:17 pm:        Spike was going to get a cable, I don't know if he did. But he can show you how to use ECMspy as well. Try the Carolina Corner Carvers section for Raleigh related posts.   Str8upsuburbz Posted on Sunday, June 01, 2008 - 12:40 pm:        I am in the Raleigh area off of Walnut st and Crossroads plaza. I take it you need to do a TPS reset. Id be happy to help. Cheers, Mark   Brakes2late Posted on Sunday, June 01, 2008 - 03:28 pm:        Great, thanks. I put a Jardine pipe on my Uly and I have a race ECM on the way. I need to do the TPS reset. Hoping to install it next weekend. I'm near Davis Dr. and High House Rd. Maybe I could ride over and install the ECM then do the reset? I'd like to learn a little bit about using the Spy software as well.   Str8upsuburbz Posted on Monday, June 02, 2008 - 10:31 am:        Im gonna be home from work thurs fri sat and sun this weekend but I might be in Myrtle beach on sat and sun. I have never used ECM spy just the Techno research VDST.   Brakes2late Posted on Monday, June 02, 2008 - 11:05 am:        OK...Hopefully the ECM will be here in the next day or two. Can you just do the reset with VDST and I'll play with ECM Spy another time (once I get a cable)? Thanks again.   Str8upsuburbz Posted on Monday, June 02, 2008 - 11:23 am:        the vdst does do a tps reset. I just downloaded ecm spy but i cannot get it to display in english, just german.   Brakes2late Posted on Monday, June 02, 2008 - 11:31 am:        Try "options" (second tab from left) then "program" (bottom of the 2 available). The drop down window about half way down the screen has english as an option.   Brakes2late Posted on Monday, June 02, 2008 - 11:33 am:        I don't know if the cable would be the same for both programs...   Brakes2late Posted on Tuesday, June 03, 2008 - 11:03 am:        ECM showed up in the mail. Any chance we can get together whenever you have some time?   Str8upsuburbz Posted on Wednesday, June 04, 2008 - 01:13 pm:        I will be home all day on Thursday till 500pm. Give me a call if you want to link up. 716-961-8700. Cheers, Mark   Brakes2late Posted on Wednesday, June 04, 2008 - 09:45 pm:        Well remarkably all the parts to make my cable showed up in the mail. I made the cable tonight and I'm going to give it a try with the ECM Spy tomorrow night. Thanks for offering to help. I'll post up my results after I install the race ECM. Maybe we can hook up to ride sometime? Always looking for Buellers in the area to ride with!   Brakes2late Posted on Saturday, June 07, 2008 - 02:00 pm:        Ok, so I made up the cable (about an hour to do in right with solder, shrink tube, etc.), plugged the cable into my laptop, downloaded the driver, plugged the cable into the bike, started ECMSpy, a BINGO!. This is some cool sh$t...

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: