G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Buellinachinashop Posted on Tuesday, October 02, 2007 - 08:11 pm:        I'd like to replace a scraped up header with a new one. Is there a trick to doing this without dropping the motor?   Al_lighton Posted on Wednesday, October 03, 2007 - 10:07 am:        No. While you can do it, it's a bit like trying to take your tonsils out through your a$$hole. Pivoting the engine down is not hard. People fear it more than they should. It doesn't take any special tools, and it really doesn't take all that long, especially if it was the exhaust that needed to come off anyway. Al   Buellinachinashop Posted on Wednesday, October 03, 2007 - 01:47 pm:        Thanks Al, I'm going to add a ceramic coated header and a new D&D pipe. So it looks like I have research to do on rotating the power plant.   Steelersfan Posted on Saturday, October 13, 2007 - 07:20 pm:        What do OEM headers cost? I have a scrape in mine I'd like to take care of this winter...   Al_lighton Posted on Sunday, October 14, 2007 - 03:21 am:        Last I checked, $199 for XB9, $205 for XB12. AL

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: