| Author | Message | ||
     Benderbuell |
Can any one tell me if there is a switch that will fit in the covered space between the engin run and the stater switch. There is a place for a switch but have not been able to find a switch to fit. | ||
| Benderbuell |
Any one???? Or is this the question of the year no one knows???  | ||
| Bombardier |
What for? | ||
| Jackbequick |
That has been discussed in the past, there may be something in the KV on it. But the bottom line, as I recall it, is that no one could find or identify a switch that is intended to fit in that area or use what appears to be an opening for mounting a switch. Jack | ||
| Reepicheep |
I thought Court posted a part number? I looked at it briefly while putting in polly cartridge heaters, but thats four wires, all fairly thick, so I don't think you would want to cram all of them in there. If you wanted to go that route, you would probably want to run smaller wires to a relay, which started sounding like too much complication for me, so I put my heater switch opposite my ignition switch in the front flyscreen support. | ||
| Benderbuell |
I wanted to mount a switch for some driving lights. I am ok with using a relay, just looked like a handy place for switch. | ||
| Dentfixer |
Doesn't the 08 Uly have a switch there for the grip heaters? I've not seen an 08 so I may be wrong. Thought someone pointed it out once. | ||
| Bombardier |
It is for the heated grip switch that are an option on the US Buell website and is under the controls section of the Accessories area. |
