| Author | Message | ||
     Italialaw |
I am trying to install this aftermarket regulator and the male bullet connectors off the regulator are too large for the female bullet connectors leading from the main circuit breaker. In fact the rubber shroud around the male connectors is completely different from the round stock one from my old regulator (which I pitched, could kick myself as I could've used the stock male connectors and spliced them onto the crane wires) Does anyone know the size of the male connectors off of the stock regulator? Part no.? I am speaking of the two that are hooked together in a round rubber shroud. Any suggestions would be appreciated. Thanks | ||
| Buell_bert |
I don't know the size but try an electrical type store (Radio Shack or other or an auto parts store). And solder it (not crimp) and use shrink tube and elect. tape. Maybe someone has an old one sitting around on the wall also. |
