Author |
Message |
Haven564
| Posted on Thursday, August 02, 2007 - 07:55 pm: |
|
Other than my local dealer, does anyone know of anyplace on the internet where I can find this type of rear turn signal? I tried American Sportbike and couldn't find it. It's a 02' Lightning
|
Buell_bert
| Posted on Friday, August 03, 2007 - 02:10 am: |
|
I must have to much free time. I looked on the internet for about an hour. I believe they are after market (check Ebay #190136910540). It is a Lightning with turn signals like yours. They are flush mounted. You may wish to ask the seller where they came from. Also try going to (1Tail.com) under lights and turn signals. I found a few turn signals that look a lot (really a lot)like yours. These are made to mount flush with the tail. From what I have seen the stock ones stick out. Good luck. I just typed in (buell turn signals) and did a search. I'm going to see if I can do it to my 2000 M2. Bert. |
Bad_karma
| Posted on Friday, August 03, 2007 - 04:48 am: |
|
Brian you might try chaparral, competition accessories or Dennis Kirk. Joe |
Haven564
| Posted on Friday, August 03, 2007 - 06:48 am: |
|
Hey thanks a lot for your help guys. Much appreciated. |
Al_lighton
| Posted on Saturday, August 04, 2007 - 01:14 am: |
|
I may have a set at work. Give me the height and width of the oval, please. Al |
Haven564
| Posted on Sunday, August 05, 2007 - 09:08 am: |
|
Al, I just ordered one from ironmachine. But thank you anyway. If it doesn't work I'll let you know. |
Haven564
| Posted on Saturday, August 11, 2007 - 05:47 pm: |
|
Ok Al, I'll take you up on your offer. Iron Machine sent me the wrong part, even after sending the picture. Anyways, the width is 2 1/2", height 1 1/2", also the "stem" that fits into the frame is 7/8". Thanks for the help. |
|