G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Dyno Charts/Testing (Show us the POWER!) » Sportster/Buell crankcase Identification

« Previous Next »

Author Message   Kdkerr2 Posted on Wednesday, July 25, 2007 - 12:05 am:        I was wondering if someone could help me identify this crank case. I specifically needed to know that it is a 5 speed as I wish to put it in my X1 frame. There is no serial # on the the upper left side of the case below the cylinder deck. It has the part #'s 24534-89 and 24558-92A and E54 cast into it. It looks similar to my 99 Buell Cyclone motor but has only 3 5/16 screws at the bottom instead of 4. KK   Blake Posted on Wednesday, July 25, 2007 - 02:30 pm:        BadWeB sponsors. Please help?   Pammy Posted on Thursday, July 26, 2007 - 09:01 am:        Looks like 5 speed to me.Early 5 speed. 4 speed uses cam bearings. 5 speed uses bushings. There should be confidential numbers stamped somewhere on the inside that may tell the date of mfg. The left hand case below the right hand stator mounting screw. It should be there.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: